Apollo Ultrasonic Füllstands-Sensor Standard Standard Betriebsspannung (Bereich): 150-250 V/AC 1S

Product Information

When all ten bars and red light are pulse flashing this indicates that the float switch/sensor has been activated and has detected oil/liquid in the bund area and must be attended to immediately. bars tells you that the tank is full and when the level reaches a low preset level in the tank an “Early Warning Nozzle” is shown. The element works by using water-absorbing polymers, which trap up to approximately half a cup of water before needing to be replaced.

Once fitted the Apollo Standard Ultrasonic Tank Gauge will give a constant fuel level displayed in easy to read graduations of useable fuel on a conveniently located LCD display, the Apollo Visual also gives a level readout at the tank mounted transmitter. In the event that the tank is filled to the top, this will not harm the transmitter as it is a sealed unit. If this does not rectify the issue there is a possibility the Apollo has not been matched correctly. The K150 mechanical flow meter meets the ATEX/IECEx requirements for the use of materials in potentially explosive atmospheres.I have removed my transmitter from the tank and have found that the liquid in the tank has left a chalky residue on the bottom of the transmitter. This time duration is measured by the oil tank level gauge’s sensor which is then used to calculate the level of liquid in the tank. The Apollo transmitter uses high-quality FM signal because it is less prone to interference when compared to AM signal. Once fitted the Apollo Standard Ultrasonic Tank Gauge will give a constant fuel level displayed in easy to read graduations of useable fuel on a conveniently located LCD display. Ideal for monitoring heating oil and diesel but suitable too for a wide range of liquids including admixtures, agricultural fuel oil, anti-freeze, biodiesel, bio heating oil, fuel oil, detergents, lubricants, waste oil and water.

The receiver is equipped to give you a number of different readings based on the information it receives. Try and relocate the receiver to a position that is nearer a window, remember that the transmitter communicates with the receiver by use of an FM signal and moving the receiver plug from possible metal obstructions can improve the signal. This information is relayed wirelessly to the receiver unit, which cleverly and conveniently plugs into a standard domestic socket, where it is displayed via an easy to read LCD display. The Apollo is an electronic gauge that uses ultrasonics to measure the level of oil/liquid in a tank.My oil tank just has a 20mm hole on the top so, having spoken to a very helpful guy in Ray Grahams, the Apollo was the only one that was suitable for my particular tank (unless I wanted to start drilling a bigger hole, which I didn't! Please keep in mind that obstacles such as walls, re-enforced walls, granite walls, metal objects or metal buildings reduce that distance.

Perfect in the agricultural sector for refuelling heavy vehicles and machinery, the K150 ATEX high capacity mechanical meter is suitable for all those sectors that need to operate on vehicles with large tanks. The K150 high capacity mechanical flow meter differs from other meters on the market, because it ensures up to 33% less pressure drop. The Apollo Bund consists of the transmitter, which must be positioned on the top of the inner or primary tank and is fitted as a normal Apollo. If working properly out of the tank then the problem is within the tank, ie, the position of transmitter on the tank, try relocating the transmitter. The K150 ATEX can therefore be used for monitoring the flow of explosive liquids such as petrol and kerosene.Having removed the transmitter from the tank, the transmitter battery is within the transmitter’s plastic casing. Please keep in mind that obstacles such as walls, re-enforced walls, metal objects or metal buildings reduce that distance. We'll be happy to send you a copy, so you can easily browse through our wide range of products wherever you are. The Apollo Standard Ultrasonic comes with two parts, firstly a tank mounted ultrasonic transmitter compatible with most modern plastic fuel storage tanks that have a 32mm port usually fitted to the tank. Also refered to as a 'Tank Pack' or 'Bottom Outlet Kit' This filter assembly kit is a filter designed for heating oil tanks and comes complete with everything that is required to quickly and simply install it.

The Piusi SEC IBC Connectors have been designed by Piusi to overcome issues associated with the traditional lever based CDS connector. The receiver unit displays the level of fuel inside the tank, via an easy to read LCD display, which usefully includes a low level warning alert. Is there an obstruction restricting the signal in the tank, this could include the location of the transmitter on the tank. The Apollo Ultrasonic is suitable for almost any tank up to 3 metres tall, irrespective of manufacturer, capacity or material of construction. Check that there is no metal object such as a van, truck or that there is nothing in the fabric of the building, that may deflect the signal.This would allow an engineer to replace the filter without draining the contents of the tank should the filter ever need changing. To comply with the new e-Privacy directive we need to ask for your consent to set non-essential cookies. The Apollo Visual Bund is a combined fuel tank level monitor and bund warning alarm, with a tank-mounted transmitter unit, spillage detector, and a plug-in receiver unit. Apollos’ have an independent transmitter and receiver, and can be setup in minutes to the tank height and after matching, will only read its own tank. Remember to switch the power off and then back on before rematching to allow for receiver plug to go into teach mode.